English
45 I-Teflon extruder Isithombe Esifakiwe
  • 45 Teflon extruder

45 Teflon extruder

Incazelo emfushane:

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Ukusetshenziswa Kwezisetshenziswa

Le mishini yakhelwe ukukhiqizwa kwe-fluoroplastics efana ne-FEP enemibala emibili (perfluoroethylene propylene, eyaziwa nangokuthi i-F46), i-FPA (i-oxyalkylene glycol resin), ne-ETFE.

Ukucaciswa okuyinhloko

  1. 1.Uhlobo Lomugqa Wokukhiqiza: Isetshenziselwa ukukhiqiza izintambo zokufakelwa kwe-fluoroplastic ezifana ne-FEP enemibala emibili, i-FPA, i-ETFE, i-TEFLON, njll.
  2. 2.Impahla Yokukhipha: Ifanele i-fluoroplastic enemibala emibili efana ne-FEP (perfluoroethylene propylene, eyaziwa nangokuthi i-F46), i-FPA (i-ethylene oxide resin), ne-ETFE.
  3. 3.Ububanzi be-Conductor: 0.3 - 7.0mm. (Izibunjwa ezihambisanayo zidinga ukuhlonyiswa ngokosayizi wedayamitha yocingo.)
  4. I-4.Isilinganisi Socingo Esifanelekile: Ф0.75mm kuya ku-Ф8.0mm.
  5. 5.Isivinini Somugqa Esiphezulu: 1 - 100m/min.
  6. 6.Ubude obuphakathi: 1000mm.
  7. I-7.Power Supply: 380V + 10% 50HZ isistimu yezintambo ezinhlanu zezigaba ezintathu.
  8. 8.Isiqondiso Sokusebenza: Umsingathi (kusuka-kuya ekusebenzeni).
  9. 9.Umbala Womshini: I-apula eluhlaza; Okuluhlaza okwesibhakabhaka okukhanyayo. (Faka umbala ngokwezidingo zekhasimende).

 Izingxenye Eziyinhloko

  1. 1.500P indawo yokukhokha ye-tension esebenzayo: isethi engu-1.
  2. I-2.I-preheater ye-copper ezenzakalelayo ezenzakalelayo: Isethi engu-1.
  3. 3.45# umsingathi (insimbi engagqwali hopper): 1 isethi.
  4. I-4.PLC uhlelo lokulawula olusekelwe kukhompuyutha: Isethi engu-1.
  5. I-5.Ithangi lamanzi le-Thermostatic: Isethi engu-1.
  6. 6.Usinki olungisiwe: Isethi engu-1.
  7. 7.I-Laser caliper: Isethi engu-1.
  8. 8.Kuvaliwe umshini wokudonsa amasondo amabili: Isethi engu-1.
  9. 9.Indawo yokubeka ingcindezi: Isethi engu-1.
  10. 10.Ikhawunta yamamitha kagesi: Isethi eyi-1.
  11. 11.Umshini wokuthatha i-axis kabili: Isethi engu-1.
  12. 12.Izingxenye eziyisipele ezingahleliwe kanye nebhukwana lokusebenza nokugcinwa: Isethi engu-1.
  13. 13.Qedela umdwebo womshini: Isethi engu-1.

Siyakwamukela kusampula yezintambo zemeyili. Imigqa yokukhiqiza eyenziwe ngokwezifiso ingenziwa ngokusekelwe kusampula yocingo, isikali sezitshalo kanye nezidingo zamandla okukhiqiza.

  • Okwedlule:
  • Olandelayo:
    • Bhala umyalezo wakho lapha futhi usithumelele wona

    imikhiqizo ehlobene

    Chofoza u-enter ukuze useshe noma u-ESC ukuze uvale